logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Logic Hamscope transmit problem
Options View
Previous Topic Next Topic
WD4ASP
#1 Posted : Sunday, January 12, 2014 6:27:04 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 50
Man
Location: Manassas, Va

Thanks: 1 times
Was thanked: 10 time(s) in 9 post(s)
Dennis,

I'm having trouble getting Logic's Hamscope interface transmit. I did get receive working by running Hamscope using Windows XP service pack 3 compatibility mode. I used to have the Hamscope interface working just fine about a year but it appears I have changed something. I'm running Windows 7 64 bit and Logic 9, version 9.0.61.
If I set Hamscope's PTT interface to the appropriate com port (COM6), set PTT using RTS, key the PTT in Hamscope and type characters into Logic's Hamscope transmit window they are transmitted correctly. However, using the same configuration except not keying the PTT line in Hamscope and type the characters in Logic's Hamscope window and hit the Enter key the transmitter does not get keyed. The characters do show up in Hamscope's transmit window. I'm sure I've changed a setting in Logic but I don't know which one it is.

Thanks,

Fred
Back to top
Sponsor
Note: We receive a commission from Amazon when you purchase via this link. It does not affect your cost. Thank you!
Back to top  
WD4ASP
#2 Posted : Saturday, January 18, 2014 1:42:39 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 50
Man
Location: Manassas, Va

Thanks: 1 times
Was thanked: 10 time(s) in 9 post(s)
Dennis,

I did some more testing and found that the macro keys work correctly - they cause Hamscope to transmit their contents. It is only when I type in the Hamscope Transmit window in Logic that nothing gets transmitted although what I attempted to transmit does appears in the Hamscope transmit buffer window. In the Hamscope window if I manually change from RX to TX the transmit buffer gets sent. Getting closer. However, it appears that operator error or forgetfulness is moving quite close to the top of the list. Still don't know what I'm missing/forgotten yet.

Fred
Back to top
WN4AZY
#3 Posted : Monday, January 20, 2014 9:31:15 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,091
Man
Location: Auburn, GA

Thanks: 997 times
Was thanked: 495 time(s) in 410 post(s)
Hi Fred:

I think all you need to do is select the Pkt mode, then press {Enter} to send the contents. See the hover text when you hold your mouse over the button.

Also, try typing in the lower receive window. I think that transmits on a character-by-character basis.

Let me know!

Tnx & 73,

Dennis WN4AZY
Back to top
WWW
WD4ASP
#4 Posted : Monday, January 20, 2014 10:49:42 AM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 50
Man
Location: Manassas, Va

Thanks: 1 times
Was thanked: 10 time(s) in 9 post(s)
Dennis,

I tried Pkt, Word and typing in the lower receive and all do the same thing, the text shows up in Hamscope's transmit window but doesn't get transmitted. What is the difference between sending a macro key vs. typing text? Is there some other setting that I am missing?

Thanks,

Fred
Back to top
WD4ASP
#5 Posted : Monday, January 20, 2014 12:50:31 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 50
Man
Location: Manassas, Va

Thanks: 1 times
Was thanked: 10 time(s) in 9 post(s)
Dennis,

I tried the following test using the macro key format:

I put <TX> test <RX> in Logic's Hamscope transmit window it transmits out abc and returns to receive.

Didn't remember having to do this before. Is this any help?

Thanks,

Fred
Back to top
WN4AZY
#6 Posted : Friday, January 24, 2014 10:15:10 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,091
Man
Location: Auburn, GA

Thanks: 997 times
Was thanked: 495 time(s) in 410 post(s)
Well, there should be no difference between typing and sending a macro.

Quote:
I put <TX> test <RX> in Logic's Hamscope transmit window it transmits out abc and returns to receive.

Didn't remember having to do this before. Is this any help?

Yeah, that helps! (Does it really transmit "abc", or does it transmit "test"? I'll assume that this is a typo and it is sending "test". If not, I have no idea :-))

What is happening is that LOGic is sending the data to Hamscope, but Hamscope is not transmitting it. There must be some setting in hamscope to cause it to automatically send.

When using hamscope by itself, does it transmit automatically as you type, or do you have to do something to make it transmit what you typed?
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.031 seconds.