I'm posting this query here as well as the TRX-Manager Forum because I have something of a "chicken and egg, which came first" situation.

I recently updated both my TRX-Manager and PDA Logic 10 Logging Program. My rig is a Yaesu FT-840, computer is Win 10. After the updates, when I start Logic 10 the program will begin loading and the screen quickly switches to the TRX-Manager screen. TRX-Manager loads as it always has and shows the rig controls which are operating with no problems.

When I switch back to the Logic 10 screen it is blank except for a small error box that says, "Cannot open TRX-Manager link. FTMGR.CAT=0". There is an "OK" button in the box and when I click on it the small screen closes and my regular Logic 10 Screen appears along with the rig frequency display and control buttons along the bottom of the screen. The frequency display on the Logic 10 screen is active and changes with any manual changes to the frequency settings on the FT-840. Vice versa, changes made to the frequency controls on the Logic 10 screen change the frequency on the rig. All remote control functions on the Logic 10 screen for the FT-840 are working normally.

I'm not sure if the problem is in the Logic 10 software update or a glitch in my TRX-Manager update. The confusion on my part is that both programs appearing to be operating normally after I click on the "OK" button in the error box that shows up on the Logic 10 screen.

I'll be posting this problem on the Logic 10 forum as well. I'm hoping that someone else has encountered this problem and may have a fix at their finger tips.

Thanks for any help.