TRX-Manager
Rig-specific Supported Features
Note that some of the features
supported by TRX-Manager require special capabilities in the rig.
Here is a table of TRX-Manager's rig-specific features and which
rigs are supported.
Note that if a particular feature is
not supported, for a particular rig, it is in most cases a
limitation of the rig, not TRX-Manager. For instance, it is
impossible to program a bandscope feature if the rig cannot send
signal strength info to the computer.
This may not be a complete list,
since the program is being updated constantly. Please contact us if
you have questions.
|
|
Read and write radio's internal memories
(note that TRX-manager has its own database of
memories that work with all rigs) |
Band Scope and S-Meter |
Notes |
|
Yaesu |
All except FT-897, FT-847, FT-100, FRG-9600,
FT-736*, FT-757GX ( FT-757GX2 OK), FT-747 |
All except FT-980, FT757GX (GX2 OK), FRG9600 (has
analog output only) |
FT-100 does not support control of antenna tuner.
FT-8900 does not support computer interface. |
|
Kenwood |
Yes |
All except 440 & 940 |
|
|
Icom |
Write memories only. Sets memory labels for
IC-746, IC-756PRO, IC-R75. |
IC-746 IC-756Pro and IC-706MKIIG only |
|
|
TenTec |
Omni 6 |
No |
Selection of filters is supported on Omni 6 |
|
JRC |
No |
No |
|
Alinco |
No |
No |
|
Notes
- The Yaesu FT-736 is incapable of sending band
and mode data to the computer. The TRX-Manager display does not
update as you manually manipulate the rig.
|
