DXTelnet

This is a letter from Fabrizio describing how to interface DXTelnet to LOGic 5.

DXTelnet inner DDE mechanism works fine with 16 bit applications but sometimes has troubles with 32.

I made a special tool to fix this problem named DDEDUPE. DXTelnet passes its spots to DDEDUPE which sends them to the wanted application.

DDEDUPE.EXE is in the C:\DXTELNET\DDEDUPE directory.

If this directory is not present in your DXTelnet you should downoload the latest DXTelnet version (4.91) from

http://www.qsl.net/wd4ngb/telnet.htm

Step by step:

Start DXTelnet, click the "Configuration" menu then "Links"

In the DDE section set exename to

DDEDUPE

set linktopic to

DDETOPIC

set linkitem to

DDEITEM

Press Save, and quit DXTelnet.

Now start DDEDUPE and set ExeName to

LOGIC

set LinkTopic to

DXTELNET

set LinkItem to any value

Press the Apply button in DDEDUPE.

Now if you start DXTelnet and connect to any node while DDEDUPE is running and start LOGIC, spots should flow in.

Ciao

Fab (IK4VYX)